There are a variety of vibrator models on the market, including bullet vibrators, G-spot vibrators, and wand vibrators, so you can choose a favorite or keep a few on hand to mix things up. The downside to these entertaining toys is that they don’t always work when you need them to, which is extremely frustrating when you’re ready to go and your vibrator won’t turn on. So, what’s the solution?
Well, learning how to fix a vibrator is the best course of action. These toys can be expensive, so rather than throwing a pricey device away, you can spend a bit of time figuring out what’s causing the issue. These toys are designed to last for a few years, even with regular use, so learning what the common problems are can save you some money while keeping your favorite bedroom gadgets doing their job whenever you need them.
If you’ve just purchased a new vibrator, you expect it to work perfectly, at least for a little while. If this isn’t the case, there are a few options you can try out to find a solution.
The most obvious thing to do if your vibrator isn’t working is to check the manual. You may have inserted the batteries incorrectly or there could be something simple like a travel lock that is engaged without your knowledge. Read the manual thoroughly to be sure you have everything assembled properly.
Checking the batteries is the next step. Be sure they are in the right way and are the right type to run your vibrator. Some models include batteries but they aren’t always in the vibrator, so check this out as well.
If you’ve purchased a rechargeable model, like the We-Vibe Tango Lipstick Rechargeable Bullet Vibrator, the solution may be as simple as plugging it in and letting it charge for a while. Though some models arrive fully charged, this isn’t always the case, so charging may be needed.
If your new toy has a travel lock, it may need to be disengaged for you to be able to use the vibrator. The instructions should tell you how to turn off the travel lock to get your model running.
Many of the smaller sex toys, including bullet vibrators, use little watch-style batteries to power them. These often have a small piece of protective paper between the connection point and the batteries to keep them from wearing out before they are purchased. Check for one of these papers and remove it if necessary.
Though many of the models on the market require a simple press of a button to get them going, some models need you to press and hold the button for a few seconds to turn it on. You can check the manual for usage instructions or just try this out with a model you think is faulty. This also may be needed to turn the vibrator off, so keep this in mind.
Even if you’ve used the right batteries and have them in the right way, they still need a proper connection to power your vibrator. Check the battery cap to be sure it is threaded properly and is screwed on tight. There may even be some markers on the vibrator’s base that need to be lined up for the toy to work, so look for this as well.
If you’ve tried all of the above options and your vibrator is still not working, it may be time to contact customer service. You could be dealing with a faulty product that needs repair or replacement, plus they may offer alternative solutions for that specific model to help you out.
If your vibrator is broken, there are a few ways to get them running again, if you have the tools and the know-how.
If your bullet vibrator is broken, you may need to take it apart, which could mean cutting it open, depending on the model. A dirty motor can prevent the vibe from running quietly or stopping altogether. Look for any dirt or debris around the motor and clean it as best you can with a Q-tip and some alcohol. You can even add some lubricant to ensure everything works smoothly. Put the vibe back together, using silicone caulking if needed on a cut model, and try it out.
Wand vibrators, like the Lovehoney Silencer Whisper Quiet Classic Vibrator 7-inch, may also stop working at times. To find the cause, you’ll need to remove the battery and control unit from the casing.
When you have them separated, check out the wires to be sure they are all connected properly. Look for any loose connections or corrosion around the battery area and tighten or clean these parts as needed. Check the motor as well for any loose connections and tighten or solder them to fix the issue.
Once you’ve checked all of these areas, put the vibrator back together carefully to avoid damaging any of the parts or pulling the wires loose. Try it out to see if your fixes have worked.
A good vibrator can provide you with years of pleasure and stimulation, even if you’re using it regularly. When one fails, it can be disappointing since you likely won’t notice until you’re either ready to use it or in the middle of a sensual session. Learning how to fix a vibrator can ensure that your expensive toys work for as long as possible.
Many of the fixes are easy and require a bit of research in the manual to get them going while others are a bit more complex and require you to take apart the toy to see what’s going on inside of it. Be sure to check out the warranty and contact the manufacturer to be sure you’re not missing anything and to see if any issues you’re dealing with are covered.