Last updated: February 19, 2024There are many reasons couples add strap-ons to their bedroom activities. They are great for lesbians who want to simulate penetrative intercourse or heterosexual couples who want to experiment with a strap-on for pegging. There are even hollow strap-ons to give men more girth to pleasure their partners with. Unfortunately, buying strap-on harnesses can be pricey and may not guarantee a comfortable fit for the person wearing them.
Luckily, it is easy to manufacture your own DIY strap-on harness right in your own home. There are several options you can use for this project, so you likely won’t have to purchase any specialized gear to get the perfect strap-on unless you want to. There are several options to choose from, so you can pick the one that suits you best. If you’re interested in making a homemade strap-on harness, check out the following sections for the most popular methods available.
There are several options when it comes to making a DIY strap-on harness, though they don’t all require the same materials. You can use an old pair of underwear, strips of bed sheets, or even rope.
Whichever you choose, you’ll likely also need some scissors, a needle and thread, and possibly an Trusted Source EPDM Rubber & Other Common O-Ring Materials Ace Seal’s O-Rings are available in PTFE, nitrile, neoprene, silicone, EDPM rubber, Fluorocarbon, and more. Choose your O-Ring based on your specifications. www.aceseal.com , though which type you choose is up to you. You’ll also need a dildo with a flared base to keep it in place in the harness you’ve created.
There are a few different measurements you need to consider when manufacturing your new harness. When putting your sewing skills to the test, you should measure the areas on your body that the strap-on will be worn on, like your thighs and waist. Use a tape measure on the areas you’re harness will be resting on to ensure you’re getting precise measurements for a snug, yet comfortable fit.
You should also measure the diameter of the toy you’re using to be sure it will fit in the hole you’re creating for it to fit through, no matter which method you’re choosing. Be sure to measure near the flared base since this will be the largest area.
If you’ve decided to learn how to make a strap-on harness, there are a few methods available, which we’ll discuss below. There is no right or wrong one to try out, so consider what you’ll be most comfortable with or what you have at home to put to use as one of these handy sex toy additions.
There are several different types of panties” title=”8 Underwear Rules to Live by for a Healthy Vagina” url=”https://www.healthline.com/health/womens-health/underwear-hygiene#_noHeaderPrefixedContent”]Your pantie guidebook to cleaning, wearing, and living.[/trusted_link] to choose from, including bikini, high briefs, mid-rise, and even cheekies. Of course, not all of them may be suited for use as a strap-on harness, like the minimal material of a thong. The panties you choose should offer a snug fit without cutting into the delicate skin of your thighs and tummy.
To make your strap-on harness, put the panties on and hold the dildo you plan to use against yourself to figure out the proper positioning for it. Mark it with a pen or marker, then remove the panties. Cut a small x on the spot you’ve marked, turn the panties inside out, and place the o-ring around the cut x. Pin the fabric flaps over the O-ring, then sew them down, removing the pins as you go. You may want to double or even triple stitch this area for added durability. Then cut off the extra material, add your dildo, and enjoy.
An old bedsheet cut into strips can be used as a makeshift harness. To begin, make a loop in the harness and place the dildo through the hole. Thread the second length of the sheet through this loop as well. Tie the first strip around your waist with the dildo positioned in front. Take the other fabric strips and push them between your legs. Tie them at your sides to create leg straps. Now your harness is ready to use.
Boxer shorts have a natural hole in them, so you don’t need to create your own to fit your chosen dildo. Of course, the hole may be a bit too bit to keep the dildo perfectly secure, so you may want to mark the size of hole you need and then sew the opening a bit to fit it in.
Boxers aren’t designed for a tight fit, though, so you may want to try boxer briefs if you’re looking for a snugger harness for your bedroom adventures. There are also specialized boxers that are designed more for sexiness than comfort. The LHM Wet Look and Sheer Mesh Boxer Shorts are a great option with a central pouch that can be altered with a hole and O-ring to fit a dildo inside, plus they are smooth and stretchy.
You can create a harness using rope if you have a durable and comfortable rope and the skills to wrap it tightly without constricting your blood flow and making you uncomfortable. Fold the rope you have to create a loop at one end and loose ends on the other. Wrap this double-thick rope around your waist, pushing the loose ends of the rope through the loop and pulling it as tight as is comfortable. Wrap the loose ends around your waist a second time and then loop them through the middle again.
Run the loose ends of the rope between your legs and up beneath the rope around your waist. Make a knot to keep it secure before running it back between your legs to the front. Separate the two rope strands and loop them over either side of the front knot. Create knots along the center piece, moving downwards, alternating which side of the rope you’re using. About halfway down, place the flared base of your dildo between the center ropes, then use the remaining ends to continue the knots to hold the dildo in place.
Run the ends of the rope to the back, right above your thighs, loop them through the ropes at the back, then run them back to the front. This creates the leg straps. Continue the knots between your legs below the dildo until there are no loose ends left.
Those with some skill with a sewing machine can use a homemade pattern to create a fabric harness that is a perfect fit. You can make them look like a normal panty or short with some embellishments that make them usable with a harness. This also gives you a bit more freedom with the type of material you use for the most pleasurable and appealing look and feel. If you aren’t comfortable creating your own pattern, there are a few online that you can use to create your perfect DIY strap-on harness.
Jeans may not be your go-to material for sexual activities but they have that zippered or button fly that makes it easy to use with the flared base of a dildo. You could even cut the jeans off at the thigh to make a more comfortable piece or sew the zipper area to create a hole that is just right for the dildo you plan on using. The button fly option may be an even better choice since you can button as many of them as needed to fit the toy you’re planning on using, plus it can be adjusted to fit larger or smaller toys if needed.
There are several types of face strap-on models available, like the Bondage Boutique Large Silicone Ball Gag with Dildo, which includes a silicone ball, textured dildo, and adjustable leather straps. You can use whatever material you like to create your own face harness, providing it is comfortable and adjustable in some way to prevent irritation or pain while you’re wearing it. Wrap this material around your chosen dildo or cut a hole in it for a more secure fit. Then tie it on and put it to good use whenever you like.
With so many different options available for homemade strap-on harnesses, it’s no wonder so many people are trying them out. This gives you the option of creating the perfect model to suit your body shape and size, especially for the bedsheet and rope options that are so customizable.
Creating a DIY strap-on harness also helps you save money since you don’t have to buy any special equipment and can use items you may already have at home. This is especially important when you consider the cost of many of the sex toys on the market. With all of these amazing benefits, there is no reason not to try out one or more of these handy harness methods.
